Add/Edit Crucible

Create and edit a virtual crucible in Inspire Cast.

  1. Click the Casting tab.
  2. Click the Components icon.

  3. Click the Add/Edit Crucible icon.

  4. Click any spot on the running system or the part to create the crucible.
    Note: If you have defined an ingate, you must remove it to create a crucible.
    The crucible is created.

  5. To edit the crucible, use the microdialog options to define the capacity.
  6. Right-click and mouse through the check mark to exit, or double-right-click.

Microdialog Options

Define the size of the crucible.

Option Description

Enter the capacity to define the size of the crucible.