ホーム
検証問題
本マニュアルでは、NAFEMSの問題を含めた検証モデルの解を紹介しています。
NAFEMS Normal Modes Analysis
OS-V: 0425 Clamped Thin Rhombic Plate
Test No. FV15 The behavior of distorted thin elements in normal modes analysis is examined using OptiStruct.

ヘルプトップ
新機能
OptiStruct2025の新機能を確認できます。
概要
OptiStructは実績のある最新の構造ソルバーであり、静的 / 動的 / 振動 / 音響 / 疲労 / 熱伝導 / マルチフィジックスの分野にまたがる線形 / 非線形解析について包括的で正確、かつスケーラブルなソリューションを提供します。
チュートリアル
インタラクティブなチュートリアルでOptiStructの各種機能を理解することができます。
ユーザーズガイド
本マニュアルは、OptiStructで利用できる機能やシミュレーション手法の詳細を提供しています。
リファレンスガイド
本マニュアルは、OptiStructで利用できる入力エントリ、出力エントリ、およびパラメータに関する詳細なリストと使用方法を提供しています。
例題集
OptiStruct例題集は、様々なソリューションシーケンスや最適化タイプについて解かれた例題を集めたもので、現実世界の応用とOptiStructの機能の例をユーザーに提供します。
検証問題
本マニュアルでは、NAFEMSの問題を含めた検証モデルの解を紹介しています。
- 航空宇宙用途
  本マニュアルでは、NAFEMSの問題を含めた検証モデルの解を紹介しています。
- NAFEMS Linear Elastic
- NAFEMS Thermo-elastic
- NAFEMS Heat Transfer
- NAFEMS Nonlinear Static Analysis
- NAFEMS Dynamic Response Analysis
- NAFEMS Random Response Analysis
- NAFEMS Normal Modes Analysis
  - OS-V: 0400 Pin-ended Double Cross
    Test No. FV2 A pin-ended double cross, in-plane vibration problem. OptiStruct is used to investigate the coupling between flexural and extensional behavior, as well as the repeated and closed eigenvalues of the double cross in Normal Modes Analysis.
  - OS-V: 0410 Cantilever with Off-Center Point Masses
    Test No. FV4 This problem tests the behavior of coupling between torsional and flexural, off-center inertial axis, and close eigenvalues. OptiStruct is used in this normal modes analysis.
  - OS-V: 0415 Deep Simply-Supported Beam
    Test No. FV5 OptiStruct tests the repeated eigenvalues, shear deformation, and rotary inertia. The possibility of missing extensional modes is also investigated.
  - OS-V: 0420 Free Thin Square Plate
    Test No. FV12 A thin square plate model that contains three rigid body modes. OptiStruct investigates the repeated eigenvalues and kinematically incomplete suppressions of the thin plate in Normal Modes Analysis.
  - OS-V: 0425 Clamped Thin Rhombic Plate
    Test No. FV15 The behavior of distorted thin elements in normal modes analysis is examined using OptiStruct.
  - OS-V: 0430 Cantilevered Thin Square Plate
    Test No. FV16 A cantilevered thin square plate of 10 m × 10 m dimension. OptiStruct is used to investigate the frequencies at different modes for different test cases.
  - OS-V: 0435 Clamped Thick Rhombic Plate
    Test No. FV22 The behavior of distorted, thick elements in normal modes analysis is examined using OptiStruct.
  - OS-V: 0440 Cantilevered Tapered Membrane
    Test No. FV32 A tapered membrane problem with irregular mesh. The geometry and mesh symmetry are maintained along the x-direction. The shear behavior of membrane elements in Normal Modes Analysis is examined using OptiStruct.
  - OS-V: 0450 Free Cylinder: Axisymmetric Vibration
    Test No. FV41 A free cylinder with axisymmetric vibration. OptiStruct is used to investigate the rigid body mode, close eigenvalues, and the coupling between axial, radial and circumferential behavior.
  - OS-V: 0455 Simply-Supported Solid Square Plate
    Test No. FV52 A well-established solid square plate, which contains three rigid modes with the given boundary condition. The test examines the performance of OptiStruct Normal Modes Analysis on 3D solid elements.
  - OS-V: 0460 Dynamic Behavior of a Fluid-containing Structure using MFLUID
    A vertical clamped free cylindrical shell with a rigid bottom is chosen to demonstrate the applicability of the structures which are partially filled such as liquid storage tanks.
  - OS-V: 0465 Simply-Supported Thin Square Plate
    Test No. 13OptiStruct is used to investigate the repeated eigenvalues.
  - OS-V: 0470 Simply-Supported Thick Square Plate
    Test 21OptiStruct is used to investigate the repeated eigenvalues and the effect of ‘secondary’ restraints.
- NAFEMS Composites
- Response Spectrum Analysis
- Elements
- Materials
- Fatigue Analysis
- Rotor Dynamics
- Frequency Response Analysis
- Explicit Dynamic Analysis
- Aeroelastic Analysis
よくある質問
本セクションでは、OptiStructに関してよくある代表的な質問についてお答えしています。

OS-V: 0425 Clamped Thin Rhombic Plate

Test No. FV15 The behavior of distorted thin elements in normal modes analysis is examined using OptiStruct.

fv15 — 図 1. FE Model with Boundary Conditions and Loadcases

Model Files

開始前に、この問題で使用するファイルを作業ディレクトリにコピーしてください。

fv15.fem

Benchmark Model

The 4-node quad elements with 12x12 mesh configuration are used to model the thin rhombic plate. The x-translation, y-translation displacements, and z-rotational displacements are fixed for all of the nodes. In addition, the z-translation, x-rotational and y-rotational are fixed for the nodes along the four edges.

The material properties are:

Property: Value
E: 200 x 10⁹ N/m²
$υ$: 0.3
$ρ$: 8000 kg/m³

Modal Analysis Results

The frequency of each targeted mode is normalized with the closed form solution. If a closed form solution is not available, the target values for H.O.E. are used instead. All benchmarked results are normalized with target values.

f*: Closed form solution


Mode 1		Mode 2		Mode 3

`f*` CQUAD4	7.938 Hz 0.9798	`f*` CQUAD4	12.835 Hz 1.0079	`f*` CQUAD4	17.941 Hz 1.0182


Mode 4		Mode 5		Mode 6

`f*` CQUAD4	19.133 Hz 0.9629	`f*` CQUAD4	24.009 Hz 1.0339	`f*` CQUAD4	27.922 Hz 1.0036

Reference

NAFEMS R0015 - Selected benchmarks for natural frequency analysis