HyperCrash

To create an interface

To create an interface

Previous topic Next topic No expanding text in this topic  

To create an interface

Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  
1.From the Menu Bar, select LoadCase > Contact Interface.
2.Right-click to access the context menu and make a selection from the list.
3.Click the Choose Contact drop-down list and select an interface type.
4.Click the Selection sub-window.
5.Select one of the following:
Self-Impact
Secondary to define the secondary group of the interface.
Main to define the main group of the interface.
See to display the selected surfaces: the main surfaces in blue, and the secondary ones in red.
6.Group definition:
Define the group using the different tools from the Selection tab.
7.Click the Properties tab.
8.Assign a Title.
9.Define the different required parameters.
10.Click Save to save the created interface.

or

Click Save + Sym. to save the interface and automatically create its symmetric: the secondary side becomes the main, and the main side becomes the secondary (not available for a Self-Impact interface).

or

Click Cancel to cancel the interface creation.

11.Click Close to close the menu.

 

Go to

Contact Interface