HyperCrash

To check an interface

To check an interface

Previous topic Next topic No expanding text in this topic  

To check an interface

Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  
1.From the Menu Bar, select Contact Interfaces > Check.

In the interface list, those with a green interface have a correct definition, the orange ones have to be checked, and the red ones have a bad definition.

2.In the listing window, click the contact interface line to select one interface.
3.Click reviewGeneral-24 to display the interface.
4.Check the error or warning message in the Message window.
5.Using the pop-up function (right button on the mouse in the interface list window):
Click See Incompat. Kinematic Cond. on Secondary to view secondary nodes of tied interfaces with incompatible kinematic conditions.
Click See Secondary nodes no proj. to view secondary nodes which cannot be projected on the main surface of the tied interface.
Click See Secondary nodes in Multiple Interfaces to view secondary nodes which are included in several tied interfaces.
Click See Interfaces. Secondary Nodes in Main Surface to view secondary nodes of tied interfaces which are also defined in the main surfaces of the same or other tied interfaces.
Click Check penetrations selected interfaces
Click Time History >> Add or Remove
6.Modify the interface Selection sub-window.
7.Modify the interface Properties sub-window.
8.Click Save to save the modified interface.

or

Click Save + Sym. to save the interface and automatically create its symmetric: the secondary side becomes the main and the main side becomes the secondary (not available for a Self-Impact interface).

or

Click Cancel to cancel the contact interface modification.

9.Click Close to close the menu.

Go to

Contact Interface