This option appears in any module in which a sensor can be set and defined.
Create or Modify a Sensor
In the sensor folder:
|1.||Click the sensor list menu and select a sensor type.|
|•||If the selected sensor is TIME:|
|o||Enter the time value when the sensor will be activated.|
|•||If the selected sensor is DIST:|
|o||Click and select the two nodes which will define the distance.|
|o||Enter the time delay for the sensor activation.|
|o||Enter the minimum distance between the two selected nodes to activate the sensor.|
|o||Enter the maximum distance between the two selected nodes to activate the sensor.|
The sensor will be activated when the minimum or maximum distance is reached and after the time delay.
|2.||To save the created sensor, click Save; or to delete the created sensor, click Delete.|