Cp (time-averaged, narrow)
-
From the Post Browser, under Standard Output > Visualizations > Slice Planes,
right click on Z-Slice Left Mirror Center and click Edit.
The Display Properties Dialog – Surface Coloring Tab opens.
- Set the Legend range from -0.3 to 0.
- From the Display Properties Micro-Dialog, switch to the Contour Line Display tab.
- Set the Display value to 7.
- Set the Contour Range from -0.3 to 0.
- From the Slice Plane Guide Bar, click on the green check mark to accept.
- Select the Top Wake | Bottom view and capture an image.