Cp (Time-Averaged, Narrow)
-
From the Post Browser, under Standard Output > Visualizations > Slice Planes,
right click on Z-Slice Vehicle Center and click Edit.
The Display Properties Dialog – Surface Coloring Tab opens.
- From the Display Properties Dialog – Surface Coloring Tab, set the Legend range from -0.3 to 0.
- From the Display Properties Micro-Dialog, switch to the Contour Line Display tab.
- From the Display Properties Dialog – Contour Line Display Tab, set the Display value to 7, and the Contour range to -0.3 to 0.
- From the Slice Plane Guide Bar, click on the green check mark to accept.
- Select the Top Wake | Bottom view and capture an image.