Cv (Time-Averaged) + Streamlines
-
From the Post Browser, under Standard Output > Visualizations > Slice Planes,
right click on Y-Slice Vehicle Center and click Edit.
The Display Properties Dialog – Surface Coloring Tab opens.
- From the Display Properties Micro-Dialog, switch to the Contour Line Display tab.
- From the Display Properties Dialog – Contour Line Display Tab, toggle-off the Display button.
- From the Post ribbon, click on the Surface Streamlines Tool.
- From the Surface Streamlines Guide Bar, set the selector type to Slice Planes, then click on the Y-Slice Vehicle Center slice plane.
-
From the Surface Streamlines Guide Bar, click on the Seeds button.
The Seeds Micro-Dialog opens.
- From the Seeds Micro-Dialog, set the Target point count to 1000.
-
From the Seeds Micro-Dialog, click on the hamburger menu expander.
The Generation Method Micro-Dialog opens.
- From the Generation Method Micro-Dialog, set the Vector variable to time avg velocity and the Integration direction to both.
-
From the Seeds Micro-Dialog, click on Calculate.
The Display Properties Dialog – Surface Coloring Tab opens.
- From the Display Properties Dialog – Surface Coloring Tab, set the Display value to constant and the color to black.
- Slide the Transparency bar about 70% to the right.
- Click on the Display hamburger menu button and set the Tube radius to 1.
- From the Surface Streamlines Guide Bar, click on the green check mark to accept.
- From the Post Browser, under Standard Output > Visualizations > Surface Streamlines, right click on the newly created Surface Streamlines and rename to Y-Slice Vehicle Center.
- Cycle through the Wake | Left , Left | Front, and Wake | Left | Rear views and capture images for each.
- From the Post Browser, under Standard Output > Visualizations > Clips, right click on Y-Clip Vehicle Center | Right and click Hide.
- From the Post Browser, under Standard Output > Visualizations > Slice Planes, right click on Y-Slice Vehicle Center and click Hide.
- From the Post Browser, under Standard Output > Visualizations > Surface Streamlines, right click on Y-Slice Vehicle Center and click Hide.