LUT_2D_4SystemAnalysis_Therm.PFM

Description

Create look up table from TM project of Flux dq, Ld, Lq and torque versus Id, Iq, coil temperature, magnet temperature and rotor position.

Note: For more details about this macro, consult this additional document

Input

  • Current in 3 supplies
  • Select mobile mechanical set
  • Select fixed mechanical set
  • Max value for Id
  • Number of values for Id (odd)
  • Number of poles
  • Number of pole pairs represented in geometry (0.5 for one pole)
  • Number of stator periodicities
  • Depending on rotor position
  • Fast computation or not
  • Operational quadrant
  • Number of steps in 1/3 of the electric period
  • Period for rotation (in degrees)
  • Motor viscuous friction coefficient (Nms/degrees)
  • Motor inertia (in kg/m²)
  • Temperature max for coils
  • Number of temperatures between 20°C and max temperature
  • Temperature max for magnet
  • Number of temperature between 20°C and max temperature
  • I/O parameter for coil temperature
  • I/O parameter for magnet temperature

Output

  • Create a result OML file with name created from the initial file (*_res.oml)
  • It will also include more data such as phase resistance, end winding inductance, electric period and initial rotor position plus possibility to display values in Compose