Cable Schematic Components

View the circuit components that can be added to the cable schematic view.

Icon	Name	Description
	Resistor	Add a resistor to the cable schematic view.
	Capacitor	Add a capacitor to the cable schematic view.
	Inductor	Add an inductor to the cable schematic view.
	Complex Load	Add a complex load to the cable schematic view.
	SPICE Circuit	Import a SPICE circuit from a file to define the circuit.
	VCVS	Add a voltage controlled voltage source (VCVS) to the cable schematic view.
	Transformer	Add a transformer to the cable schematic view.
	Cable General Network	Import an N-port Touchstone from file to define a general network.
	Device Ground	Add a device ground to the schematic view with the option to short to the installation. The following symbols are used: Open circuit Short circuit For combined MoM/MTL harnesses, the device ground indicates the transitioning point from circuit to full wave solver. Connections beyond the device ground should be included in the full wave model.
	Installation	For MTL harnesses, add a connection to the installation (3D model geometry).
	Cable Port	Add a cable port to the cable schematic view. Voltage sources and loads can be applied to cable ports.
	Voltage Probe	Define a voltage probe to measure the voltage between two points and add to the cable schematic view.
	Current Probe	Define a current probe to measure the current at a point and add to the cable schematic view.

Note: Schematic circuit connections take preference over mesh connections when working with the combined MoM/MTL solver.