•Target-specific peripheral blocks for programming the following devices:
•AMD64™
•Arduino® Leonardo, Mega 2560, Nano, and Uno
•Raspberry Pi™ Zero, Zero W, 1A+, 1B+, 2B, 3A+, 3B, 3B+, and 4B
•STMicroelectronics® STM32® F0x, F103x, F3x, F4x, F7x, G0x, G4x, H7x, L4x, and WBx
•Texas Instruments™ ARM® Cortex® M3, C2000, Delfino, MSP430, and Piccolo
•Blocks for communicating with the target device and performing analog and digital I/O operations with the analog and digital ports on the target device
•Fixed-Point blocks
•Texas Instruments Digital Motor Control and MotorWare blocks
•Enhanced automatic C code generators to produce code that will run on your device
Intellectual Property Rights Notice:
Copyright © 1986-2022 Altair Engineering Inc. All Rights Reserved.
This Intellectual Property Rights Notice is exemplary, and therefore not exhaustive, of intellectual property rights held by Altair Engineering Inc. or its affiliates. Software, other products, and materials of Altair Engineering Inc. or its affiliates are protected under laws of the United States and laws of other jurisdictions. In addition to intellectual property rights indicated herein, such software, other products, and materials of Altair Engineering Inc. or its affiliates may be further protected by patents, additional copyrights, additional trademarks, trade secrets, and additional other intellectual property rights. For avoidance of doubt, copyright notice does not imply publication. Copyrights in the below are held by Altair Engineering Inc. except where otherwise explicitly stated. Additionally, all non-Altair marks are the property of their respective owners.
This Intellectual Property Rights Notice does not give you any right to any product, such as software, or underlying intellectual property rights of Altair Engineering Inc. or its affiliates. Usage, for example, of software of Altair Engineering Inc. or its affiliates is governed by and dependent on a valid license agreement.
Altair Simulation Products
Altair® AcuSolve® ©1997-2022
Altair Activate® ©1989-2022
Altair® BatteryDesigner™ ©2019-2022
Altair Compose® ©2007-2022
Altair® ConnectMe™ ©2014-2022
Altair® EDEM™ © 2005-2022 Altair Engineering Limited, © 2019-2022 Altair Engineering Inc.
Altair® ElectroFlo™ ©1992-2022
Altair Embed® ©1989-2022
Altair Embed® SE ©1989-2022
Altair Embed®/Digital Power Designer ©2012-2022
Altair Embed® Viewer ©1996-2022
Altair® ESAComp® ©1992-2022
Altair® Feko® ©1999-2022 Altair Development S.A. (Pty) Ltd., ©1999-2022 Altair Engineering Inc.
Altair® Flow Simulator™ ©2016-2022
Altair® Flux® ©1983-2022
Altair® FluxMotor® ©2017-2022
Altair® HyperCrash® ©2001-2022
Altair® HyperGraph® ©1995-2022
Altair® HyperLife® ©1990-2022
Altair® HyperMesh® ©1990-2022
Altair® HyperStudy® ©1999-2022
Altair® HyperView® ©1999-2022
Altair® HyperWorks® ©1990-2022
Altair® HyperXtrude® ©1999-2022
Altair® Inspire™ ©2009-2022
Altair® Inspire™ Cast ©2011-2022
Altair® Inspire™ Extrude Metal ©1996-2022
Altair® Inspire™ Extrude Polymer ©1996-2022
Altair® Inspire™ Form ©1998-2022
Altair® Inspire™ Friction Stir Welding ©1996-2022
Altair® Inspire™ Mold ©2009-2022
Altair® Inspire™ PolyFoam ©2009-2022
Altair® Inspire™ Play ©2009-2022
Altair® Inspire™ Print3D ©2022
Altair® Inspire™ Render ©1993-2016 Solid Iris Technologies Software Development One PLLC, © 2016-2022 Altair Engineering Inc.
Altair® Inspire™ Resin Transfer Molding ©1990-2022
Altair® Inspire™ Studio ©1993-2022
Altair® Material Data Center™ ©2019-2022
Altair® MotionSolve® ©2002-2022
Altair® MotionView® ©1993-2022
Altair® Multiscale Designer® ©2011-2022
Altair® nanoFluidX® ©2013-2022 Altair Engineering GmbH, © 2018-2022 Altair Engineering Inc.
Altair® OptiStruct® ©1996-2022
Altair® PollEx™ ©2003-2022
Altair® Pulse™ ©2020-2022
Altair® Radioss® ©1986-2022
Altair® SEAM® © 1985-2019 Cambridge Collaborative, Inc., © 2019-2022 Altair Engineering Inc.
Altair® SimLab® ©2004-2022
Altair® SimSolid® ©2015-2022
Altair® ultraFluidX® ©2010-2022 Altair Engineering GmbH, © 2018-2022 Altair Engineering Inc.
Altair® Virtual Wind Tunnel™ ©2012-2022
Altair® WinProp™ ©2000-2022
Altair® WRAP™ ©1998-2022 Altair Engineering AB
Altair® S-FRAME® © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-STEEL™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-PAD™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-CONCRETE™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-LINE™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-TIMBER™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-FOUNDATION™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair® S-CALC™ © 1995-2022 Altair Engineering Canada, Ltd., © 2021-2022 Altair Engineering Inc.
Altair Packaged Solution Offerings (PSOs)
Altair® Automated Reporting Director™ ©2008-2022
Altair® e-Motor Director™ ©2019-2022
Altair® Geomechanics Director™ ©2011-2022
Altair® Impact Simulation Director™ ©2010-2022
Altair® Model Mesher Director™ ©2010-2022
Altair® NVH Director™ ©2010-2022
Altair® Squeak and Rattle Director™ ©2012-2022
Altair® Virtual Gauge Director™ ©2012-2022
Altair® Weld Certification Director™ ©2014-2022
Altair® Multi-Disciplinary Optimization Director™ ©2012-2022
Altair HPC & Cloud Products
Altair® PBS Professional® ©1994-2022
Altair® Control™ ©2008-2022
Altair® Access™ ©2008-2022
Altair® Accelerator™ ©1995-2022
Altair® Accelerator™ Plus ©1995-2022
Altair® FlowTracer™ ©1995-2022
Altair® Allocator™ ©1995-2022
Altair® Monitor™ ©1995-2022
Altair® Hero™ ©1995-2022
Altair® Software Asset Optimization (SAO) ©2007-2022
Altair Mistral™ ©2022
Altair Drive ©2021-2022
Altair® Grid Engine® ©2001, 2011-2022
Altair® DesignAI™ ©2022
Altair Breeze™ ©2022
Altair Data Analytics Products
Altair® Knowledge Studio® © 1994-2022 Altair Engineering Canada, Ltd., © 2018-2022 Altair Engineering Inc.
Altair® Knowledge Studio® for Apache Spark © 1994-2022 Altair Engineering Canada, Ltd., © 2018-2022 Altair Engineering Inc.
Altair® Knowledge Seeker™ © 1994-2022 Altair Engineering Canada, Ltd., © 2018-2022 Altair Engineering Inc.
Altair® Knowledge Hub™ © 2017-2022 Datawatch Corporation, © 2018-2022 Altair Engineering Inc.
Altair® Monarch® © 1996-2022 Datawatch Corporation, © 2018-2022 Altair Engineering Inc.
Altair® Panopticon™ © 2004-2022 Datawatch Corporation, © 2018-2022 Altair Engineering Inc.
Altair® SmartWorks™ © 2021-2022
Altair SmartCore™ © 2011-2022
Altair SmartEdge™ © 2011-2022
Altair SmartSight™ © 2011-2022
Altair One™ ©1994-2022
Embed supports hardware devices that use the words master and slave to describe relationships in bus modes, communication protocols, and connections. We recognize that these words are inappropriate and offensive. We are evaluating how to change these words without introducing technical confusion.