DefaultSource
This virtual block eliminates the presence of unconnected input ports in the diagram.
Library
Activate/SignalGenerators
Description
The DefaultSource block is a virtual block used mainly for aesthetic reasons. It can avoid leaving block input ports unconnected. Its usage also prevents warnings concerning unconnected ports.
The DefaultSource block does not affect the port of the block to which is connected. The type and size of the corresponding input is determined by the block and its value is set to zero, exactly as if the port was not connected.
Ports
| Name | Type | Description | IO Type | Number |
|---|---|---|---|---|
Port 1 | explicit | output | 1 |
Advanced Properties
| Name | Value | Description |
|---|---|---|
always active | no | Time Dependency = standard mode activated |
direct-feedthrough | no | |
zero-crossing | no | |
mode | no | |
continuous-time state | no | |
discrete-time state | no |