DFlipFlop

This block takes the value of the D-input at a specific cycle of the clock, such as the rising edge, when the clear option is off. This value becomes the Q output. At other times, the Q output remains unchanged.

    DFlipFlop

Library

Activate/FlipFlops

Description

The value of port D is copied to the output port Q when the following conditions are satisfied:

a. The rising or falling edge prescribed in the Capture Edge parameter is detected by the input port CLK

b. When the Clear Output Flag parameter is set to "!CLR" and the third input port is non-zero or true.

Alternatively, the parameter is set to "CLR" and the third input port is zero or false.

The truth table for the inputs and outputs are:

D Q !Q

0 0 1

1 1 0

Parameters

DFlipFlop_0

NameLabelDescriptionData TypeValid Values

init

Initial value

Initial Value: Output at port Q at initial time

Scalar

edge

Capture edge

Capture Edge: Rising or falling edge of port CLK

String

'Rising'
'Falling'

edge2

Clear output flag

Clear Output Flag: This block is enabled when "!CLR" is selected and the third input is non-zero. Alternatively, the block is enabled when "CLR" is selected and the third input is zero.

String

'!CLR'
'CLR'

Ports

NameTypeDescriptionIO TypeNumber

D

explicit

input

1

CLK

explicit

input

2

!CLR

explicit

input

3

Q

explicit

output

1

!Q

explicit

output

2

Advanced Properties

NameValueDescription

always active

no

direct-feedthrough

yes

zero-crossing

no

mode

no

continuous-time state

no

discrete-time state

no

Diagram

DFlipFlop