Demux

Given a vector valued input, this block splits inputs over vector valued outputs.

    Demux

Library

Activate/Routing

Description

The Demux block splits an input vector signal into a given number of output signals. The number of outputs can be set by the "Number Of Outputs" parameter. The input signal is required to be a column vector. For each output input, its dimension is configured in the table "Output Ports Sizes", the value in ith table entry corresponds to the ith output signal. It's possible to specify port sizes using negative values, which indicates the input signal dimension is determined by diagram compiler automatically. For example the input is 3x1 vector, "Output Ports Sizes" are -1, 1, the two output signals are of size 2x1, 1x1. If the the input is 4x1 vector, "Output Ports Sizes" are -1, -1, the two output signals have the same size 2x2.

Parameters

Demux_0

NameLabelDescriptionData TypeValid Values

nout

Number of outputs

Specify the number of output signals to be splitted.

Number

outports

Output ports sizes

Specify the dimension of each output signal.

Structure

outports/size

Vector sizes

Cell of scalars

Ports

NameTypeDescriptionIO TypeNumber

Port 1

explicit

output

nout

Port 2

explicit

input

1

Advanced Properties

NameValueDescription

always active

no

direct-feedthrough

yes

zero-crossing

no

mode

no

continuous-time state

no

discrete-time state

no