Network Analysis (Statistical Eye)

  1. Select Statistical Eye (Bathtub) for Analysis Type.
  2. Select the net, MUC_HOST_USB+.


    Figure 1.
  3. Change the Baud Rate (Gbps) to 4 and NoiseRMS to 0.003 and then click Analyze.
    After the simulation, Statistical Eye Analysis Result dialog opens.


    Figure 2.
  4. Click Close.
  5. Push again the Display Result button in the Network Analysis dialog.
  6. By pressing the Measure button and checking Line X and Distance X, user can manually measure the eye width at the desired position as below:
    The value is 0.2727 (ns) in this case. Please note that the measured distance value is changeable depending on which point the user clicks.


    Figure 3.