Calibration factors - Inputs

1. Overview - Definitions

 Label Symbol Tooltip, note, formula Ref. temperature * The reference temperature.First, resistance values are computed by considering a temperature equal to 20°C. However, the user can also define his own reference temperature to compute the corresponding phase resistance and Line-Line resistance values. Note: This reference temperature is used only in the winding design environment. The test temperatures are defined in the test settings (refer to TEST chapter). Winding resistance factor * Setting of the “Resistance factor”. It allows adjusting computation result of resistance with resistance measurement. Thus, the resulting phase resistance value is considered. End winding inductance factor * Setting of the “Inductance factor”. It allows modifying the computation result of end-winding inductance. Thus, the resulting end-winding inductance value is considered. Ref. max. Line-Line voltage Umax Reference maximum Line-Line voltage. It allows evaluating the voltage drop between the conductors. Voltage drop limit * Voltage drop limit between 2 superimposed conductors. This limit is given to better visualize the voltage threshold which shall not be exceeded (see the displaying of colored fields in the table).