Get back results in FluxMotor
1. Introduction
All the motors resulting from the runs performed with Altair® HyperStudy® can be used back in Motor Catalog of Altair® FluxMotor® and then they can be edited in Motor Factory very quickly.
|
|
| Motor Catalog – Visualization of results got from HyperStudy® | |
| 1 | A catalog is automatically built by using the name of the connector defined by the user |
| 2 | All the runs from HyperStudy® are stored in the dedicated catalog |
| 3 | Each motor can be selected, visualized and edited in Motor Factory to be evaluated more in depth |
2. Connection between FluxMotor® and HyperStudy®
Before starting new studies in HyperStudy® by using connectors exported from FluxMotor® , FluxMotor® must be registered as a new solver script in HyperStudy®.
This must be defined only when using the coupling for the first time.
|
|
| Connection between FluxMotor® and HyperStudy® | |
| 1 | Open the area in HyperStudy® to register FluxMotor® 2022.1 script |
| 2 | Path where FluxMotor s .exe must be selected to
be registered as a new solver in HyperStudy®. Note: FluxMotor s .exe with a “s” at the end of
FluxMotor s. This must be defined only when using the coupling for
the first time.
|