Target Category: C2407, Delfino, F280x, F281X, Piccolo, STM32
The CAN Config lets you configure the controller area network.
Baud Rate Prescale: See Texas Instruments or STM32 documentation.
Bus Rate: See Texas Instruments or STM32 documentation.
Byte Order: See Texas Instruments or STM32 documentation.
RX Mux Pin: See the Texas Instruments documentation. This parameter is available only for Cortex M3 targets.
Sample Point: See Texas Instruments or STM32 documentation.
Synchronization: See Texas Instruments or STM32 documentation.
TSeg1 and TSeg2: See Texas Instruments or STM32 documentation.
TX Mux Pin: See Texas Instruments documentation. This parameter is available only for Cortex M3 targets.
Unit: Specifies the unit.